Genuine OEM Kia Sedona II Power Steering Pump 1999-2010

This is an Original Equipment (Genuine) Power Steering Pump, remanufactured using brand new components and quality tested.

This pump has been rebuilt using O.E spec seals and bearings and are tested thoroughly using hi-tech equipment. The core itself has also been specifically checked to ensure no internal scoring.

No Surcharge

The listing price is the total price you pay. No need to return the old unit to us.

Installation

All consult your manufacturer’s fitting guidelines before fitting. As a general guide:

1. Remove original pump and replace defective hoses; be sure all O-rings or fitting seals are replaced.
2. Install the pulley (if equipped) using proper tools and procedures – NEVER hammer the pulley on; do not use a press.
3. Use the manufacturer’s recommended fluid.
4. Flush the system following original manufacturer procedures and install pump using proper tools. Turn steering to the lock position 10 times to help with the bleeding. The wheels must be grounded instead of suspended on a ramp.
5. Align pulley then tighten belts using a tension gauge to manufacturer’s spec or inspect belt tensioner for proper operation as applicable. Premature pump failure can result from an over-tightened belt.
6. Before operating the system, check fluid levels, prime the pump, and check that pulleys and belts are clear of obstacles and routed correctly.
7. If possible, crank engine in short bursts to circulate fluid and allow any trapped air to rise toward the reservoir.
8. Start engine and check fluid levels. If fluid level drops, this is an indication that air is still in the system. It may be necessary to vacuum bleed the system using appropriate tools and procedures.
9. If noisy operation persists or fluid stays foamy, a restriction in the system may be the cause. Check for damaged or defective hoses, a blocked reservoir filter, a blocked remote reservoir hose, or a blocked or restricted cooler (if so equipped). Prolonged operation with any of these conditions will affect operation and cause premature pump failure.

Delivery

Please see Delivery tab for additional postage to certain ‘remote’ UK postcodes.

Compatibility Check

Please check against the OE number listed above or send us your car registration number.

Specification:

• Brand: Advantage Auto Parts
• Manufacturer Part Number: HP2005
• Reference OE/OEM Number: 571004D300, 57100-4D300, 57110-4D300-57100-4D000
• Type: Genuine OEM Power Steering Pump
• Make: Kia
• Important Notes 1: Pulley Pressed On
• Important Notes 2: No additional costs / surcharge. This is the total price.
• Year Break: 1999-2010
• No. of Ribs: 120mm
• Belt Pulley Diameter: With Belt Pulley
• For Steering Manufacturer: Unisia
• Country/Region of Manufacture: United Kingdom
• Universal Fitment: No